Home > Product Ranges > Cords

o ring supplier

O-ring Cord Supplier

 

Description: O-ring cord is extruded rubber in an O shaped section. It is generally available in Nitrile (NBR) Viton (FPM) Silicone (VMQ) and EPDM. Materials. Cord such as EPDM O-ring Cord is generally supplied on coils of varying length, typically 25, 50 or 100 metres dependent upon the cross section or material.

 

Applications of O-ring Cord

O-ring cord is generally used to produce O-rings in special sizes which are not generally available from stock. The O-ring cord is cut and then either cold butt jointed using superglue or scarf jointed and vulcanised using a special vulcanising tool. Cold butt jointing is usually done in the field for emergency repairs whilst scarf jointing and vulcanising is more of a workshop or manufacturing operation. O-ring cords can also be used for making gaskets or sealing enclosures.

 

Dichtomatik: As a cord distributor, Dichtomatik are able to supply EPDM O-ring cord in many different materials to meet the various different O-ring cross sections found in all the British and International standards such as BS 1806, BS4518, ISO 3601-1, DIN 3771-1, SMS 1588, JIS 2401, AS 568, NF T47-501.

 

Please see below some of the different types of O-ring cords available from an O-rings cord distributor such as Dichtomatik. Call us on 0845 463 1039 for further technical information, general enquiries and ordering or email us here.

 

 

Our products:

 

dichtomatik O-rings
dichtomatik Rotary shaft seals
dichtomatik Piston seals
dichtomatik  Back-up rings
dichtomatik  V-rings
dichtomatik  Piston rod seals
dichtomatik  Cords
dichtomatik  Axial seals VRM
dichtomatik  Wipers
dichtomatik  X-rings
dichtomatik Boxed service kits dichtomatik  Guide element
dichtomatik  Bonded seals   dichtomatik Cover seals
   

 

 
Go back to product ranges

 



seal distributor

o ring and seal company

o ring specialist

FPAL